Ghost 2 Immobiliser Reviews
The Ghost 2 immobiliser utilizes modern technology to stop car theft. The device is hidden by thieves and only turns on the engine when a PIN or app is entered.
It connects to the CAN data network in your vehicle and is weatherproof. It comes with a service/valet feature that allows you to temporarily start your car when it is in garage.
Easy to install
The Ghost immobiliser is a cutting-edge security tool that safeguards your vehicle from cloning, hacking, and key theft. It is an PIN code system that is integrated into your vehicle's electronic control unit, making it impossible for thieves to identify. Unlike traditional immobilisers, it doesn't require special keys or sensors, and is completely hidden from view without any LED indicators or signals to give away its presence. It's also cheaper than replacing an ECU or installing an entirely new key fob. It also can reduce the cost of your monthly insurance.
Follow the directions of the manufacturer when installing follow the manufacturer's instructions when installing a Ghost 2 vehicle immobiliser. This will ensure that the device functions efficiently and correctly. Test the system after installation by entering the PIN number and then starting the car. Regular testing will allow you to identify any problems before they get worse.
Before beginning the installation, double-check the position of the CAN H and CAN L wires. These are crucial to powering the immobiliser, therefore it is important that they are properly connected. Labelling the wires can help you locate them when installing. Once you have identified the locations of these wires, connect them to a permanent 12V power source as well as a grounding point. Use a fuse tap to shield the connections from short-circuits or damage.
After connecting the wires, neaten the wires with cable ties to stop interference. It is also a good idea to cover the wires with insulation tape or heat shrink tubing. This will shield them from electrical shorts and extend the life of the device. It is a good idea to test your Ghost 2 immobiliser once the wiring has been secured.
The Ghost 2 immobiliser offers a service mode for situations where you may need to surrender your vehicle for example, when it is being serviced or valet-parked. This will disable the PIN sequence for a short period of time. To activate this feature, simply press the brake pedal while pressing the accelerator, and press a number of times that is equal to the first digit of the emergency code. The system will enter service mode. This can be confirmed by flashing five times the indicator signal.
Change PIN codes easily
It is simple to secure your vehicle from theft by installing an immobiliser ghost 2. It is discreetly installed inside the vehicle and is able to be accessed by a unique code. The device connects directly to the vehicle ECU through its data bus. It does not use radio frequency signals like traditional Thatcham immobilisers or aftermarket alarm systems. This makes it more difficult for thieves to detect the sound of an immobiliser relay or even to make new keys. The control unit is hidden within the vehicle's wiring harness or dashboard and is not physically accessible to reset the system.
The ghost 2 immobiliser is connected to your vehicles CAN Data network and uses the buttons already present on the steering wheel, door panels, and the central console to generate an individual sequence of up 20 button presses that must be entered prior to the engine starts similar to the PIN code. This unique system can be reprogrammed and doesn't require wire cutting during installation. You can even start your vehicle in Valet or Service mode after you hand it to a mechanic perform work.
The app can also be used to block your PIN code in the event that you've lost your keys or change it. This feature is especially helpful when you have lent your car to a third party to use as a valet parking space or for servicing since it prevents them from starting your vehicle and driving away without your consent. It's also unnoticeable by professional thieves because it doesn't make use of circuit cuts or radio frequencies.
The capability of the immobiliser to prevent relay thefts is another important feature. Relay theft is a popular method of car theft where criminals attack the diagnostic port of your car and then alter the original signal transmitted by the key to the vehicle's ECU to trick it into believing that there is a valid key. This is the way traditional immobilisers are bypassed, however, with the ghost 2 immobiliser the signal is blocked before it can reach the ECU.
Easy to use app
Ghost 2 is an immobiliser that is revolutionary. It protects your vehicle from key-cloning. It is activated by connecting to the CAN data network in your vehicle and asking you to enter a pin code before it will start the engine. It also deters thieves from by using signal spoofing or device spoofing that are popular techniques used to steal vehicles.
The system is easy to use and functions as a normal car alarm. The installation of the system allows you to create an individual 20-digit PIN code that must be entered before you start the vehicle. This will prevent the vehicle from being taken even if your keys get removed. If you want to deactivate the system you can do this via an app on your smartphone.
In contrast to other systems it is completely silent and does not emit radio frequency signals. It is a weatherproof, discreet device that can be positioned in any vehicle. It can be concealed under the dashboard, steering wheel or door panels. It communicates over the CAN data loop to your ECU and is not affected by the diagnostic tools used by thieves to find security systems. It is also not affected by jamming devices that alter codes.
It is a hidden system that can be used to prevent theft from all vehicles. The technology has been proven effective, and it complies with TASSA Standards. The ghost is a great solution for classic, sports and prestige automobiles, and can be used to safeguard vehicles that are let out on websites like Turo.
The Autowatch Ghost 2 represents the next generation of car immobilisers. This system is undetectable to thieves and prevents the vehicle from starting without a PIN or are authorised by the app. It also doesn't emit any radio frequencies or other signals that can be detected by scanners. Installation is simple and quick. The app is easy to navigate and offers a user-friendly interface that makes it easy to configure and use. It also includes a GPS tracker to assist police locate and find the vehicle.
Easy to reset
A ghost 2 immobiliser is an excellent way to safeguard your vehicle from theft. It integrates into your vehicle's ECU creating a wall that thieves are unable to break through without the proper pin. The device is TASSA verified which means it's recognized by insurance companies. It's a useful tool to prevent car theft and could save you money in the end.
The Ghost system unlike traditional alarms or immobilisers, which require cutting of circuits, is directly connected to your vehicle's CAN data network. It works through the buttons on your dashboard and steering wheel. You can set up a unique PIN sequence, which can be up to 20 presses in length. The PIN must be entered before the engine can start, just as with a credit card PIN. The Ghost system is completely inaccessible to thieves, and there are no LEDs to indicate its presence. This makes it the most reliable aftermarket CAN-bus system available today.
The Ghost system has another advantage that it does not transmit radio frequency signals. This means it is not detected by thieves or snatched up. This is a deterrent to key attacks that are cloned and relay attacks as well as the usual method of hacking into a car's computer system using its CAN bus scanning for signals. The Ghost system is designed in a way that it can be concealed within your vehicle. There aren't any lights, or other indicators to show its presence.
The system also comes with the option of a Transport Mode that disables the Ghost system, which is useful for situations when you need to temporarily disable it, for instance, when you are traveling or performing maintenance. However, this mode is not as efficient as Service Mode, as it does not deactivate the system if your vehicle is traveling over 31 mph for 15 minutes.
To reset your ghost 2 immobiliser, you will need to have the emergency code, which is available from your installer. The code is usually hidden under the scratch-off area of the card provided with the installation. This emergency code should be kept secure and kept in a safe place, such as your wallet at home.